HOME

 CONTACT SEARCH
Hydrostatic Testing
About Clover Tool Company
Clover BOP units
Clover Riser Tools
Clover Torque Wrenches
Clover Bolt/Nut Runners
Clover Hydraulic Power Units
Clover Hydraulic Fluid Filter Carts
Clover Sockets and Accessories
Clover Lubricants

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

HYDROSTATIC TEST UNITS
• CTU-20P-D2 TEST UNIT
• CTU-15P-S1 TEST UNIT
• Combination High Pressure and High Flow Prefill Pump

 

Combination High Pressure and High Flow Prefill Pump Designed for Pipeline, Oilfield or Petrochemical Hydrostatic Test Work
Clover Combo Test Unit

Shown as: Trailer mounted with a 150 HP Diesel Engine driving an Aqua-Dyne MS
Series High Pressure Hydrostatic Test Pump with a High Flow Centrifugal Pre-fill Pump

Aproximate dry weight: 10,000 Lbs. (4,550 Kgs.)
Range of Performance
Based on 100% volumetric and mecanical efficiencies.
In practice derate pressure or volume by 10% or increase HP by 10%
400/600 GPM PRE FILL 1,515/2,273 L/M
20,000 PSI at 12.0 GPM HYDRO TEST 1,400 Kg/cm2 at 49 L/M
15,000 PSI at 17.1 GPM HYDRO TEST 1,050 Kg/cm2 at 73 L/M
10,000 PSI at 25.7 GPM HYDRO TEST 700 Kg/cm2 at 98 L/M
7,500 PSI at 34.2 GPM HYDRO TEST 525 Kg/cm2 at 141 L/M
5,000 PSI at 51.4 GPM HYDRO TEST 350 Kg/cm2 at 196 L/M

Standard Features

Pump: AQUA-DYNE, Inc. horizontal triplex positive displacement pump rated to 100 HP service, with an integral gearbox providing direct drive capabilities. Plunger pump consists of Valve-in-Line, sectionalized stainless steel Valves and Seats with self-adjusting spring loaded chevron packing. The plungers and packing are pressure water lubricated. The power end of the pump is positive splash oil lubricated with dip stick for oil level check. Main bearings are roller type.

Suction Plumbing: Washable large capacity stainless steel bag type filter(s) are standard.

Unit Mounting: Rugged steel frame construction with pump base and adjustable motor base. Steel plate top deck.

Discharge Plumbing: Discharge manifold with interchangable high pressure discharge connections for pressure gauge, relief valve, rupture disc and hose couplings. Stainless steel glycerin filled pressure gauge, stainless steel snubber assembly and relief valve connect high pressure pump via hose to the pipe manifold.

Power Transmission: Slip proof tooth belt drive. Sheaves, belt and hubs are totally enclosed by a belt guard. Belt tension is taken up by adjustable motor base.

Optional Features

Finish System: Units are zinc primed and have one (1) coat of individual blue (or choice of color) enamel. Coating for corrosive atmospheres are available.

Pre Fill Pump: High flow and suction lift centrifugal pump direct coupled to jack shaft driven off the motor.

Pipe Manifold: High pressure high flow manifold connects both pre fill and high pressure pump to the pipe. High pressure high flow closure valve isolates high flow pump during final high pressure testing.

Suction Hose: Washable large capacity stainless steel bag type filter(s) are standard.

Discharge Hose: Connects high flow pump to the pipe manifold.

Unit Mounting: Tandem four (4) wheel trailer with fenders and pneumatic tires, with ball or ring hitch on tongue. Front and rear stabilizing jacks. Brake and lighting options available.

Hose Rack: Mounts on trailer top for storage of multiple long sections of suction and discharge hose. Hand winch is provided to pull hoses on and off the rack.

Tool Box: Lockable storage space for pump parts, tools, spare wheels, etc.

Jib Crane: Raises and lowers pipe manifold on and off trailer.

 
P.O. Box 820809 Houston, Texas USA 77282-0809 | Phone: (281)561-5600 | Fax: (281) 561-5672 | E-mail: clover@clovertool.com