HOME

TORQUE WRENCHES

Pneutorque PTM-72 Series
PTM-72 tools use the same ‘twin motor’ handle as the PTM-52 but fitted with a durable72mm gearbox to allow higher torque outputs.The ‘twin motor’ concept gives thebenefit of high run-down speeds while adding very little to the size and weight of thetool.

•Fast -1000 N.m version has a free speed of 140 rpm for rapid bolt run-down.
•Light weight - single direction 2000 N.m stall tool weighs just 6.2 kg.
•Quiet - less than 85 db(A) when under load.
•Non impacting - low vibration levels make these tools comfortable and safe to use.
•Square drive is quickly and easily replaceable.
•On Bi-directional tools,the direction control knob is locked while the tool is running to prevent accidental damage to the gearbox.
•‘Soft Start’trigger control aids socket location and allows gradual and safereaction location.
•For safety,gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the operator.
•1”square drive available for the 1000 N.m version,Part No.18492.

Pneutorque PTM-92 and PTM-1 19 Series
The latest extension to the PTM tool range brings the speedadvantage of the twin motor handle to higher capacity Pneutorquemodels.Coupled with new gearbox designs,these new models deliver anideal balance between robustness,speed and weight.

Models to 3400 N.m., Single Speed
Based on the original Pneutorque,the ‘Standard Series’ Range is a direct result of over40 years of refinement and development necessary to keep pace with industry’srequirements today.In use on many thousands of applications worldwide,Pneutorque Wrenches continue torepresent the foundation of Norbar’s powered tool range.

•Models available for almost every bolting application.

•Forward and reverse operation.

•Low operator fatigue – quiet,non impacting or pulsing.

•Repeatability of ±5%.

•Other reaction styles can be designed to suit specific applications.

•Electronic torque transducers can be fitted for precise torque monitoring.

Models to 3400 N.m., Two Speed
Two Speed models offer all of the advantages of single speed versions but with the additional benefit of a run down speed five times greater than the final torque speed.

•Models available for almost every bolting application.

•Forward and reverse operation.

•Low operator fatique – quiet,no impacting or pulsing.

•Repeatability of ±5%.

•Other reaction styles can be designed to suit specific applications.

•Electronic torque transducers can be fitted for precise torque monitoring.

Models to 100,000 N.m., Two Speed
Two Speed Models offer all of the advantages of single speed versions but with theadditional benefit of a run down speed five times greater than the final torque speed.

•Models available for almost every bolting and torque application,up to 300,000 N.m .

•Forward and reverse operation.

•Low operator fatigue –quiet,no impacting or pulsing.

•Repeatability of ±5%.

•Other reaction styles can be designedto suit specific applications.

•Electronic torque transducers can be fitted for precise torque monitoring.

•Models 13 and 14 supplied with blank reaction plate for fabrication to specific requirements.