|
    
     
|
HYDROSTATIC TEST UNITS
|
Combination
High Pressure and High Flow Prefill Pump Designed for Pipeline,
Oilfield or Petrochemical Hydrostatic Test Work
|
 |
Shown as:
Trailer mounted with a 150 HP Diesel Engine
driving an Aqua-Dyne MS Series High Pressure Hydrostatic Test Pump
with a High Flow Centrifugal Pre-fill Pump
Aproximate dry weight: 10,000 Lbs. (4,550 Kgs.) |
| |
Range
of Performance
Based on 100%
volumetric and mecanical efficiencies.
In practice derate pressure or volume by 10% or increase HP by 10% |
| 400/600
GPM |
PRE
FILL |
1,515/2,273
L/M |
| 20,000
PSI at 12.0 GPM |
HYDRO
TEST |
1,400
Kg/cm2 at 49 L/M |
| 15,000
PSI at 17.1 GPM |
HYDRO
TEST |
1,050
Kg/cm2 at 73 L/M |
| 10,000
PSI at 25.7 GPM |
HYDRO
TEST |
700
Kg/cm2 at 98 L/M |
| 7,500
PSI at 34.2 GPM |
HYDRO
TEST |
525
Kg/cm2 at 141 L/M |
| 5,000
PSI at 51.4 GPM |
HYDRO
TEST |
350
Kg/cm2 at 196 L/M |
|
| |
Standard
Features
Pump:
AQUA-DYNE,
Inc. horizontal triplex positive displacement pump rated to 100 HP
service, with an integral gearbox providing direct drive
capabilities. Plunger pump consists of Valve-in-Line, sectionalized
stainless steel Valves and Seats with self-adjusting spring loaded
chevron packing. The plungers and packing are pressure water
lubricated. The power end of the pump is positive splash oil
lubricated with dip stick for oil level check. Main bearings are
roller type.
Suction
Plumbing: Washable
large capacity stainless steel bag type filter(s) are standard.
Unit
Mounting: Rugged steel frame construction with pump base
and adjustable motor base. Steel plate top deck.
Discharge
Plumbing: Discharge
manifold with interchangable high pressure discharge connections for
pressure gauge, relief valve, rupture disc and hose couplings.
Stainless steel glycerin filled pressure gauge, stainless steel
snubber assembly and relief valve connect high pressure pump via
hose to the pipe manifold.
Power
Transmission: Slip
proof tooth belt drive. Sheaves, belt and hubs are totally enclosed
by a belt guard. Belt tension is taken up by adjustable motor base. |
Optional
Features
Finish
System: Units
are zinc primed and have one (1) coat of individual blue (or choice
of color) enamel. Coating for corrosive atmospheres are available.
Pre
Fill Pump: High
flow and suction lift centrifugal pump direct coupled to jack shaft
driven off the motor.
Pipe
Manifold: High
pressure high flow manifold connects both pre fill and high pressure
pump to the pipe. High pressure high flow closure valve isolates
high flow pump during final high pressure testing.
Suction
Hose: Washable
large capacity stainless steel bag type filter(s) are standard.
Discharge
Hose: Connects
high flow pump to the pipe manifold.
Unit
Mounting: Tandem
four (4) wheel trailer with fenders and pneumatic tires, with ball
or ring hitch on tongue. Front and rear stabilizing jacks. Brake and
lighting options available.
Hose
Rack: Mounts
on trailer top for storage of multiple long sections of suction and
discharge hose. Hand winch is provided to pull hoses on and off the
rack.
Tool
Box: Lockable
storage space for pump parts, tools, spare wheels, etc.
Jib
Crane: Raises
and lowers pipe manifold on and off trailer. |
|
Contact us for more info
|
|
