"Providing Excellence Since 1981"

 











BOLT/NUT RUNNERS

PT1500 Series
Pistol Grip

'Pneutorque' pneumatic wrenches provide a smooth and continuous output drive which can be controlled by means of an air pressure regulator (Lubro Control Unit). Having set the the air pressure from the supplied graph, the tool will stall out with a repeatability of 5% on a given joint.

  • New 72mm diameter gearbox for improved access.

  • Powerful - up to 2000Nm. All torques can be achieved at less than 6 bar.

  • Switchable forward and reverse operation.

  • Low operator fatigue - non impacting, pistol grip, quiet (79dB at 1 meter).

  • Soft start trigger control aids socket location and allows gradual reaction take up.

  • For safe operation, gearbox can turn independently from handle.

  • An optional automatic two speed gearbox reduces bolt run-down time.

  • Versions available for remote operation.

 
 Model		Square 	Part			Range

		Drive	Code

	  	in			   Nm	         lbf.ft
_____________________________________________________________________

  500	 	3/4	18023		90-500		66-370

  500 AUT	3/4	18023 AUT	203-500		150-370

  1000	  	3/4	18022		190-1000	140-740

  1000 AUT	3/4	18022 AUT	488-1000	360-740

  1000	 	 1	18026		190-1000	140-740

  1000 AUT	 1	18026 AUT	488-1000	360-740

  1500 	 	 1	18021		300-1500	220-1100

  1500 AUT	 1	18021 AUT	760-1500	560-1110

  2000	 	 1 	18033		400-2000	300-1450

  2000 AUT	 1	18033 AUT	1000-2000	750-1450
Pneutorque Wrenches
Standard Series

Model	Square 	Part			Range

	Drive	Code

	  in			   Nm	         lbf.ft

_________________________________________________________

  1	 3/4	16031		160-680		120-500

  1	  1	16011		160-680		120-500

  1A	  1	16097		270-1200	200-900

  2	  1	16013		515-1700	380-1250

  5	  1	16015		880-3400	650-2500

  6	 1 1/2	16017		880-3400	650-2500

  7	 1 1/2	16066		1762-6000	1300-4500

  9	 1 1/2	16072 MTS	2710-9500	2000-7000

 11	 2 1/2	16046 MTS	4400-17000	3250-12500

 13	 2 1/2	16052 MTS	13550-47000	10000-35000

 14	 3 1/2	16045 MTS	22375-81500	16500-60000

Nose Extensions
Special nose extension reaction devices are available for use in situations where tool access is restricted. A typical application is the rear wheel nuts on heavy vehicles.

Manual Two Speed Gearbox
This attachment enables the Pneutorque operator to run down the nut at 5 times normal speed, thus saving time. The gearbox is then changed to 'low' gear to apply the specified torque.

Automatic Two Speed Gearbox
Offering the same time saving advantage of the manual gearbox, the automatic requires no operator intervention. The 'Auto Two Speed' is ideal for high volume applications where speed is critical.

Remote Control
Twin port reversible air motors are available for remote control operation in hazardous areas or can be built into sophisticated multi-spindle systems.

Geared Offset
Originally designed to tighten plate heat exchangers where nuts have to be rundown studs of up to 1 meter.

This 1:1 offset is invaluable in situations where access is limited due to headroom or tool diameter.

 
Clover Tool Company
P.O. Box 820809
Houston, Texas USA
77282-0809		 Phone: (281)561-5600
Fax: (281) 561-5672
E-mail:clover@clovertool.com
 http://www.clovertool.com